3 Tonne Forklift

How to move diesel forklift correctly?

When using a diesel forklift, it is important to use it safely. As a diesel forklift operator, the inspection steps before getting on the truck shall not be less than. In order to ensure the safe use of the diesel forklift, the operator should carefully check whether there are problems with the safety belt, horn light, backup alarm, etc. Pay attention to the opening speed of the diesel forklift. Check for changes in sexual stability. Before each operation, the operator shall fasten the safety belt and observe relevant regulations.

The tire shall be correctly selected and installed according to the tire size, and the appropriate inner tube shall be selected. Tires installed on the same machine have structure and performance. If this is not possible, tyres of the same size, make, type and type shall be fitted on the same axle. When replacing new tires, replace the whole vehicle at the same time; Tires with directional patterns shall be installed in the normal rolling direction; When replacing a new tire, install the new tire on the front wheel and the repaired tire on the rear wheel. How to reduce tire wear?

Diesel forklift can work on ordinary roads, rugged mountain roads and muddy roads. The tyres have strong grip and will not slip. The diesel forklift can drive on Chenling beach, snow, ice and snow, and muddy roads, with good off-road performance.

When the power supply of the diesel forklift is insufficient, the power protection device of the diesel forklift will automatically open, and the diesel forklift will refuse to rise, and re loading is prohibited. At this point, the forklift operates without loading to load at the loading position. Before stopping, put down the diesel forklift, put down the forklift carefully, stop and cut off the whole vehicle. The loading height shall not affect the driver's vision. When there are special circumstances that affect the front view, reverse and drive at low speed.

In order to maintain the forklift diesel engine, we always advocate that users should adhere to the principle of prevention first, carry out systematic, standardized and scientific maintenance on the forklift, and strive to improve the use efficiency of the forklift. The maintenance of thorns is divided into the operation phase. The diesel forklift has rough surface and poor lubrication efficiency during operation, which increases the wear and looseness of locks. Therefore, the use and maintenance of diesel forklift shall be carried out according to the specified operation cycle. Maintenance is divided into daily maintenance, primary maintenance, secondary maintenance and tertiary maintenance.

Daily maintenance of diesel forklift:

Check the oil level in the oil pan, oil bath air filter and fuel injection pump. If the oil level rises, find out the cause and eliminate it. If the oil quantity is insufficient, add it to the specified value.

Check the cooling water level in the water tank. If it is not enough, please fill it in. When the temperature is lower than 5 ℃, the cooling water (excluding antifreeze) will be discharged after stopping.

Check and tighten the bolts and nuts for oil, water and air leakage of the diesel engine.

When working in a dust area, compressed air can be used to remove the dust on the air filter element.

Remove dust, dirt and grease from the diesel engine.

When the diesel engine is running, attention should be paid to the sound, smoke control, exhaust fault detection and abnormal handling.

लोकप्रिय टैग: 3 Tonne Forklift, China, manufacturers, wholesale, price, cheap, pricelist, made in China